This review paper summaries scientific research about horse thermoregulation and the consequences of using a blanket. Horse owners put blankets on their horses to protect them when they are clipped, to protect them from bugs, to keep them clean and so on. This can have consequences for the horse which their owners might be unaware of. I have tried to answer following questions by searching the available scientific literature; ? How can the horse maintain thermoregulation? ? Is there a risk of suffering when horses wear a blanket? ? Is there a risk of suffering when horses do not wear a blanket? ? How can animal inspectors estimate the welfare of horses when they wear or do not wear a blanket? My result shows that horses who wear a blanket have an increased risk of becoming overheated, develop a chafing, have an increased exposure hazard and have a restrained natural behaviour.

In this project a method used for performing accurate simulations on magnetization dynamics based on constrained field density functional theory has been validated and used for performing computations on a few magnetic materials. The method has been shown to simulate systems consisting of iron well, but there are still problems with simulations of alloys containing both magnetic and non-magnetic materials..

There are two objectives of this study.The first one was to study the new instrument Deltack fromPrufbau, and with the new knowledge, study the interaction between blanket and paper.Deltack is a new instrument to measure the ink splitting force. Blankets from an earlier study doneby GATF have been montered on 12 different Deltack print forms and those have together with Deltackbeen the base for this project.This study together with information from GATF?s study shows that some of the blankets have ahigher capability to adsorb ink. Those blankets generate a sharper shape on the force curve, they havea lower dot gain, but they print not as good solid..

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.

A study of paleomagnetic remanence and anisotropy of magnetic susceptibility (AMS) has been performed on the Öje-Diabase in Dalarna, Sweden, and on basic dikes associated with the alkaliquartzsyenite/granite Noran-pluton in central Sweden. Based on isolation of directions of characteristic magnetization in the basic rocks, a division into three different groups (A,B,C) has been made. Group Aconsists of dolerites of Jotnian origin, both dolerites from the Öje-Diabase and dikes associated with the Noran-pluton are included in this group, making them coeval. Group B is suspected to show a re-magnetization from the later part of the Svekonorwegian orogeny. Group C belongs to the Blekinge-Dalarna-Dolerites (BDD). Thermal demagnetization of dolerites revealed two different types of demagnetization behaviours, one where magnetite clearly was the source of the remanence, and an other with a linear decrease in magnetization intensity. The measurements of magnetic anisotropy reveals a magnetic fabric with an almost horizontal foliation and a lineation that indicates a fairly uniform NNW/ S-SE flow direction of the magma..

This thesis describes a method of measuring axial magnetic leakage flux in an operational hydropower generator. Axial magnetic leakage flux is the magnetic flux at the ends of a rotating generator, which goes through the stator parallel to the rotor axis. This flux can cause circulating currents in the stator iron, giving rise to losses, and can in the worst case overheat a generator, causing it to melt down. To measure the axial flux, and how it affects the generator temperature, a measurement system was constructed on behalf of Vattenfall. The system consists of search coil sensors and a signal-processing unit with amplifiers and active filtering.  To confirm the behaviour of the axial leakage flux and the functionality of the measurement system, a test installation was made.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

With a growing population on earth the amount of end-of-life vehicles (ELVs) and other scrap steel increases. The European Directive 2000/53/CE? requires a minimum of 95 % reuse and recovery and 85 % re-use and recycling no later than 1 January 2015, for end-of life vehicles. This imposes a need for more efficient recycling and recovery. Despite this shredder residue (SR) is commonly land filled.This report investigated the magnetic fines residue generated at Stena Metall shredder facility in Halmstad, Sweden.

Development in spin dynamic occurs in the whole world because of therising demands on fast electronic storage for example hard drivesand RAM (Random Access Memory). Measuring the spin resonance of amaterial gives you the insight of the theoretical speed for amagnetic memory. This means the maximum storage speed is below thefirst resonance. All magnetic materials have different propertiesthat will inflict the resonance frequency which brings that theconstructors of memories need to know which magnetic material theywill use to obtain best results. In the market for normal users themaximum storage speed in a RAM memory is 1.6 GHz.

In this report a new gear concept is evaluated using the magnetic finite element method (FEM)software MagNet and Ansys as well as the mechanical FEM software Abaqus. The gear conceptis evaluated in terms of maximum torque capability, torsional stiffness, gear ratio and efficiency.ABB Corporate Research has proposed a new gear concept which should be less expensive thangearboxes used today. The new concept is called aMagnetic Harmonic Traction Drive and usesthe principles of a harmonic drive gear to achieve a high reduction ratio. The gear conceptreplaces the wave generator used in traditional harmonic drives with magnets and uses tractioninstead of gear teeth to transfer the torque. The main components in the gearbox are the magnets,the flexspline, the magnetic portion and the circular spline.

The purpose of this thesis was to investigate different methods do measure velocity of pistons in pneumatic cylinders at Bosch Rexroth Teknik AB. Through information of velocity the adjustment of a cylinders damping can be done easier.A future transducer will be used by salesmen, service personnel and customers. This requires a sensor that is easy to apply and use. It is also desirable that the sensor is cheap. A number of possible methods to measure velocity have been presented.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

Magneter har använts långt tillbaka i tiden för att behandla olika åkommor. Det senaste årtiondet har de fått ett uppsving som en alternativmedicinsk metod. De påstås ha olika medicinska effekter så som att ge ökat blodföde och verka smärtlindande och avslappnande på ömma muskler. Syftet med den här studien var att studera huruvida hästtäcken med 120 stycken insydda permanenta magneter (à 900 gauss) har någon effekt på beteenden hos hästarna vilka tyder på en ökad avslappning. Sju normala, friska hästar inkluderades i en prospektiv, randomiserad, blindad, placebokontrollerad cross-over studie.

The purpose of this study was to evaluate the effect of bilateral repetitive transcranial magnetic stimulation (rTMS) on language ability in eight participants with aphasia. All participants underwent two periods of treatment and five periods of evaluation. During one treatment period high frequency stimulation was given to the left hemisphere and low frequency stimulation to the right and in one other period placebo stimulation was given. Boston Naming Test and Token Test were used to assess the effects of treatment on naming ability and language comprehension. Results showed that no significant effects were found on group level.

There is always a need for more effective ways to store energy in order to reduce the human impact on the environment. One step on the way can be the use of flywheels as kinetic energy storage devices. Low frictional losses are essential for a flywheel to be effective. To minimize these losses active magnetic bearings (AMB) can be used to keep the shaft centered instead of the more conventional ball-bearings. AMBs use actuators and a fast control system that needs correct and noise-free measurement data of the shaft position and the current in the actuators to work properly.This thesis explains the process of constructing power electronics and a current measurement system for active magnetic bearings (AMB).